Here’s how to get yours working, too.
Installing Apple Mighty Mouse or Magic Mouse Drivers in Windows 10
If your computer has Bluetooth, that’s half the equation. Drivers are the second half. I am using the discontinued Apple Mighty Mouse, model A1197. Apple makes official Windows drivers for their peripherals, including the Mighty Mouse and Magic Mouse. They are bundled up with Boot Camp, which lets you boot Windows on your Mac. Normally, you get these drivers as part of the Boot Camp Assistant setup process. But if you are no longer a Mac user, you can snag them from Apple’s support pages. I found the driver in the Boot Camp Support Software 5.1.5769 (August 2015) zip file. Go ahead and download this file and unzip it. Inside, to navigate the BootCamp > Drivers > Apple folder. In there, you’ll find a file called applewirelessmouse64.exe. Run it to install your Magic Mouse drivers or Mighty Mouse drivers.
(Note: If you are using an Apple Magic Trackpad, try out the AppleWirelessTrackpad64.exe drivers.) Proceed through the Device Driver Installation Wizard.
Click Finish when you’re done.
Pairing Mighty Mouse or Magic Mouse in Windows 10
Now that you have the drivers, the next step is to pair the mouse. It had been so long since I used my Mighty Mouse that I had forgotten how to pair it. There isn’t a pairing button, just an on/off switch on the bottom that slides over the optical sensor on the bottom. To get it to pair, go into your Bluetooth settings in Windows 10. Turn off your mouse and click Add Bluetooth or other device and choose Bluetooth.
When Windows starts looking for the device, switch on your mouse while holding the left-click button. Keep holding the left-click button till the green light on the bottom starts flashing.
Your Apple mouse should show up in the list of devices. Click it. If prompted for a passcode, try 0000 or 1111.
Once you’re connected, Windows 10 will finish setting it up. That’s it! You should be up and running. I’ve only tried this on my Apple Mighty Mouse. But I believe it should work with any Apple wireless mouse. If you try it on your Windows 10 PC, let me know about your success or failure in the comments. PS A note about the feature image. This was taken by Feureau (Own work) [CC BY-SA 3.0 or GFDL] via Wikimedia Commons. I could’ve taken a photo of my own Mighty Mouse, but it’s filthy. When I say I dusted it off, I mean that figuratively… The biggest problem I had was pairing the A1015. There was a metal strip on top of the batteries which fell out as soon as I opened the battery cover. I took me a long time to work out how to re-insert that strip. The trick was realizing that the strip of white was intended to be visible from the underside of the mouse when it was switched off (the cover was closed). Once I got it correct I was able to pair the mouse successfully to Win10. Pity is wasn’t the two button version!! Thanks again !! Once this was done, I followed the instructions again and the mouse appeared immediately for pairing and started to work fine. Comment Name * Email *
Δ Save my name and email and send me emails as new comments are made to this post.
